February 1995 saw the arrival of the Mitsubishi Lancer Evolution III which had several improvements over the previous models. The final iteration of the Evo on the CE9A chassis had new, more aggressive styling and aero which improved the air supply to the radiator, intercooler and brakes. New side skirts, rear bumper moldings and a larger rear spoiler reduced lift. The engine was improved and had a higher compression ratio than before, and a new turbo resulted in a power output of 270 bhp (201 kW) at 6,250 rpm, and torque of 309 N⋅m (228 lb⋅ft) at 3,000 rpm. All of these improvements resulted in Mitsubishi finally taking home their first drivers title in WRC at the hands of Finnish driver Tommi Mäkinen - beginning their now legendary four consecutive champion win streak.
The high quality acrylic plate is laser cut with the iconic Evo 3 design and 10 LEDs in the base light it up to give a 3D hologram effect. This is perfect for any Evo fan to brighten up an area around the lounge, bar, garage, mancave, hallway, games room or bedroom. Place it on a desk, bookshelf, bedside table or anywhere else you want to display your passion for the iconic Evo. You can even use it as a nightlight to pass on the passion to the next generation of car enthusiasts 😉.
Also available in the Evo's final form, the Evo 10 LED lamp!
Option “Remote"
Comes with both a Remote Control and Touch Button base. Change between multiple colors, flashing modes & adjust the intensity of light!
How to Use
Step 1: Insert the acrylic plate into the base, then connect the power source by USB cable or put 3 batteries into the base of the bottom (Battery type : AA).
Step 2: Use the remote controller to control the light. Change the color, intensity of light or the mode.
Step 3: Turn the light off by remote controller or touch the power button for 4 seconds.
What's in the box? 1 Acrylic plate; 1 Light base; 1 USB cable (0.8m); 1 Instruction manual; 1 Remote controller. Note: Battery is not included. Please remove the protective film before use.
Touch button base only
Comes with a touch button base - change between several colors - Red/ Green/ Blue/ Yellow/ Green/ Purple.
How to Use
Step 1: Insert the acrylic plate into the base, then connect the power source by USB cable or put 3 batteries into the base of the bottom (Battery type : AA).
Step 2: Touch the power button to change the color.
Step 3: Touch the power button for 4 seconds and the light will be turned off.
What's in the box? 1 Acrylic plate; 1 Light base; 1 USB cable (0.8m); 1 Instruction manual. Note: Battery is not included. Please remove the protective film before use.
Power Source: DC
Certification: CE
Model Number: CE9ALED
Batteries Included: No
Voltage: 5V
Light Connector: USB Cable
Lamp Control: Touch Power Button
Package includes: 1Base 1Plate 1USB 1Manual