Every car guy or girl always has a can of WD40 close at hand - for the product that does everything, here are our top 10 uses!
-
Keep Dead Bugs Off
In addition to preventing bugs from hitting your vehicle, WD-40 is also a great option for removing already stuck-on bugs, bird droppings, tree sap, and grime. It won’t damage your paint; just remember to rinse it off with soap and water afterwards.
-
Clean and Restore License Plate
If you have a rusty, old license plate, WD-40 will clean it easily. Just spray it on, wait 30 seconds, and wipe it off with a rag. Rinse with soap, and viola, a restored license plate!
-
Clean Off Small Paint Rub
If another car got a bit too close and left a small paint scuff on your car, a little WD-40 may do the trick. While not recommended for large areas, small amounts of paint transfer can be effectively removed with WD-40. Wash off the area with soap and water back to its original finish.
-
Spark Plug Lubrication and Maintenance
If your car won’t start in wet or humid weather, try WD-40. WD-40 removes carbon residue and keeps moisture away from spark plugs and spark plug wires. WD stands for Water Displacement, so if your spark plugs are wet or you need to drive moisture away from ignition distributors, WD-40 will do the trick.
Turn off the vehicle and spray the spark plug wires and the inside and outside of your distributor cap with WD-40. Start the car back up to see if that did the trick.
If you keep having difficulties starting the car in wet or humid weather, you probably have a more serious problem, such as wires that need replacing. Using WD-40 to repel water from spark plugs, distributors, alternators, and batteries is a good way to prevent corrosion and keep moisture away. You can also use it to ease the removal of spark plugs, especially if there is any rust or corrosion.
-
Clean Oil
If you need to clean oil from your hands, old oil cans, exhaust pipes, or even large oil spots on your driveway, WD-40 will wash it right off. When you are done removing the oil with WD-40, rinse off the area with soap and water.
-
Remove Dirt, Grease, and Grime
Use the WD-40 Specialist Industrial-Strength Degreaser to clean off even the most stubborn dirt, grease, and grime from your car parts.
-
Remove Stickers, Decals, Bugs, and Bird Dropping
Instead of using a knife or razor blade to remove stickers, decals, or any other material stuck to your car, use WD-40 first. Spray it on the surface, wait 30 seconds to a minute, and then use a no-scratch scouring pad to wipe it clean. Don’t forget to rinse with soap and water when you are finished.
-
Prevent Mud from Sticking
If you’re an off-roader, you’ll know how difficult it is to get all of that mud and dirt off your vehicle after it dries. Prevent the mud from sticking in the first place by using WD-40 on your ATV, dirt bike, Jeep, or any other automotive vehicle.
-
Prevent Breaking or Rounding Off Stuck Nuts and Bolts
If you have any rusty or stuck nuts and bolts, spray WD-40 Rust Release Penetrant to penetrate the threads. Wait a couple minutes and spray a second shot for good measure. Any fastener will be able to come off without damaging the threads or stripping the bolt.
-
Protect Weatherstripping
Spray some WD-40 on your door gaskets/weatherstripping and windshield wipers to keep them pliant and extend their lifespans. You can also use WD-40 to unstick car doors and windows during cold weather.
For even more uses check out the most popular uses here.
Now you can get the same reliable style for your Airpods with this awesome silicone case. Keep them clean and scratch free all while rocking that classic WD style.
What JDM build would be complete without a bit of NOS thrown in? Get those for your Airpods here!
*Case cover only, Airpods and case not included.
Item Type: Airpod Earphone Cases
Size: for Airpods 1, 2, pro
Model Number: Airpods WD40
Material: Silicone
